10x20 Custom Trade Show Booth Kit Q – Dual Wide Angled-Top Backwalls, 9.8ft 3D Vertical Column, Arch Monitor Display Stand, Highboy Cocktail Table & 6ft Stretch Table Cover

Create a commanding, networking-ready 10x20 exhibit with our 10x20 Custom Trade Show Booth Kit Q — a fully furnished inline booth for the 10ft x 20ft trade show stall that pairs dramatic architectural height with premium branded visitor engagement surfaces. The backwall is anchored by two wide 7.9ft W x 8.2ft H angled-top tension fabric panels — among the widest angled-top panels in our entire lineup — spanning nearly 16ft of the exhibit rear with bold, directional angled crowns on both sides. A towering 3.3ft W x 9.8ft H x 1.3ft D 3D vertical column adds branded height at nearly 10ft, while an 8.2ft W x 7.5ft H x 3.3ft D 7-shaped arch monitor display stand with a VESA-compliant monitor bracket anchors digital content display within the exhibit. A custom highboy bar-height cocktail table, a 6ft stretch-fit back-zippered table cover, and two custom-printed podiums round out a visitor engagement interior purpose-built for networking, presentations, and consultative selling. Produced at our Texas print facility, we serve businesses in Cypress, TX, the greater Houston area, and exhibitors nationwide.

What’s Included in the 10x20 Booth Kit Q?

A complete, turnkey 10x20 trade show exhibit combining wide angled-top backwall panels, a nearly 10ft 3D column, a branded arch monitor stand, and a rich networking engagement interior:

• 2x Custom 7.9ft W x 8.2ft H Angled-Top Tension Fabric Backwall Displays – Two of the widest angled-top backwall panels in our catalog — each 7.9ft wide and 8.2ft tall with a bold directional angled crown profile, spanning nearly 16ft combined across the exhibit rear
• 1x Custom 3.3ft W x 9.8ft H x 1.3ft D 3D Vertical Column – A nearly 10ft tall three-dimensional branded column structure adding commanding vertical presence and branded height to the exhibit — the same column type used in our premium 20x20 island Booth A and Booth 14 configurations
• 1x Custom 8.2ft W x 7.5ft H x 3.3ft D 7-Shaped Archy Monitor Display Banner Stand – Large arch-profile branded banner stand with integrated monitor support — 8.2ft wide, 7.5ft tall, and 3.3ft deep — positioning a 40″ monitor within the exhibit for digital content or video display
• 1x Monitor Bracket – VESA-compliant bracket supporting a monitor up to 40″ and 32 lbs (200x200, 200x400, 300x300, or 400x400mm)
• 1x Custom Highboy Bar-Height Cocktail Table with Graphic Cover – Standing-height branded cocktail table with custom-printed graphic cover for visitor networking and engagement
• 1x 6ft Stretch-Fit Back-Zippered Table Cover with Custom Logo Print – Custom-printed stretch-fit table cover for a standard 6ft event table — a branded table surface element found in very few 10x20 configurations in our lineup, providing a sleek, wrinkle-resistant branded table presentation
• 2x Hard Case Podiums with Custom Printed Graphics – Two custom-branded presenter podiums — one for each engagement zone of the exhibit — each doubling as a protective hard-shell transport case
• 2x Trade Show Display LED Lights & Clips – Two LED fixtures for professional illumination of the backwall panels

What Makes Booth Q Unique?

Two 7.9ft Wide Angled-Top Backwall Panels – The Widest Angled-Top Panels in Our 10x20 Lineup

At 7.9ft wide and 8.2ft tall each, the two angled-top backwall panels in Booth Q are among the widest individual backwall panels used in any 10x20 configuration in our catalog. Spanning nearly 16ft combined across the exhibit rear, their bold directional angled crowns create a dynamic, wide-angle backwall silhouette that fills the 20ft stall rear with graphic presence and architectural energy. The pair of matched wide angled-top panels creates a symmetrical, intentional backwall composition — unlike configurations that mix panel widths or profiles — for a clean, unified branded rear display at scale.

9.8ft 3D Vertical Column + 8.2ft Arch Monitor Stand – Structural Height and Digital Display

The 3.3ft W x 9.8ft H x 1.3ft D 3D vertical column brings the same nearly-10ft branded structural height used in our flagship 20x20 island Booth A to the 10x20 inline format, commanding vertical presence at one side of the exhibit. The 8.2ft W x 7.5ft H x 3.3ft D arch monitor stand adds a large, arched branded structure with integrated monitor display at another point within the exhibit — together creating two architectural anchor structures within the 10x20 footprint alongside the wide angled-top backwall.

Highboy Cocktail Table + 6ft Stretch Table Cover + Dual Podiums – Networking Engagement Interior

Booth Q’s visitor engagement interior is purpose-built for networking and consultative selling: a branded highboy cocktail table for standing conversations, a 6ft stretch-fit back-zippered table cover providing a sleek branded surface for a standard event table — the only 10x20 configuration in our lineup with a stretch table cover — and two custom-printed podiums giving both sides of the exhibit a branded presenter station. The combination of cocktail table, stretch-covered event table, and dual podiums creates the richest branded furniture and networking surface set of any 10x20 configuration in our catalog.

Why Choose Our 10x20 Custom Trade Show Booth?

Booth Q is for brands in Cypress and across the country who want a 10x20 exhibit that’s as much a branded networking environment as a graphic display — with wide angled-top backwall panels, a nearly 10ft 3D column, an arch monitor stand, a highboy table, a stretch table cover, and dual podiums all within a single inline footprint:

• Two 7.9ft wide angled-top backwall panels – Among the widest angled-top panels in our catalog — nearly 16ft of bold directional backwall coverage across the 20ft exhibit rear
• 9.8ft 3D vertical column – Island-exhibit column height and branded structural presence within a 10x20 inline footprint
• 8.2ft arch monitor display stand – Large branded arch structure with integrated 40″ monitor bracket for digital content display
• Highboy cocktail table – Branded bar-height networking surface with custom graphic cover
• 6ft stretch-fit back-zippered table cover – Custom logo-printed stretch table cover — the only 10x20 in our lineup with this branded table surface element
• Dual custom-printed podiums – Two branded presenter stations for simultaneous engagement at both sides of the exhibit
• Custom-printed tension fabric throughout – High-resolution, full-color UV-printed fabric on all panels, column, arch stand, table cover, cocktail table cover, and podiums
• Lightweight aluminum frame – Fast setup and easy dismantling for the full component set

Booth Applications

Ideal For

• Brands who want a 10x20 exhibit purpose-built for networking, consultative selling, and extended visitor dwell time — with a cocktail table, stretch table cover, and dual podiums
• Corporate brands who want island-exhibit column height (9.8ft 3D column) and structural presence within a 10x20 inline footprint
• Exhibitors who need both a highboy networking table and a 6ft branded table surface within the same 10x20 exhibit
• Companies using an arch monitor stand for digital content alongside a dedicated networking and table furniture environment
• Professional services, B2B, financial, and corporate exhibitors where consultative table conversations and dual branded presenter stations are central to the exhibit strategy
• Any exhibitor who wants the only 10x20 trade show booth with a stretch table cover, highboy cocktail table, 9.8ft 3D column, and arch monitor stand

Product Specifications

Kit Components

• 2x 7.9ft W x 8.2ft H angled-top tension fabric backwall displays
• 1x 3D vertical column (3.3ft W x 9.8ft H x 1.3ft D)
• 1x 7-shaped archy monitor display banner stand (8.2ft W x 7.5ft H x 3.3ft D)
• 1x Monitor bracket (up to 40″, 32 lbs, VESA 200x200/200x400/300x300/400x400mm)
• 1x Custom highboy bar-height cocktail table with graphic cover
• 1x 6ft stretch-fit back-zippered table cover with custom logo print
• 2x Hard case podiums with custom printed graphics
• 2x Trade show display LED lights & clips

Frame & Materials

• Frame: Lightweight aluminum – easy transport, setup, and dismantling
• Fabric: Premium UV-printed tension fabric on all panels, column, arch stand, table cover, cocktail table cover, and podiums
• Booth Footprint: 10ft x 20ft inline or peninsula trade show stall

Artwork & File Setup Requirements

Accepted File Formats & Specs

• File Formats: JPEG or PDF (single page only)
• Color Space: CMYK
• Resolution: 150 dpi for raster images
• Max File Upload Size: 300MB
• Submit artwork built to ordered size – scaled artwork is automatically detected and fit to order
• Do not include crop marks or bleeds
• Double sided products must be uploaded as two separate files unless otherwise specified in the artwork template

Additional Artwork Tips

• Do not submit Pantones or Spot Colors – convert all to CMYK
• Convert live fonts to outlines before submitting
• Use provided design templates when available for best results

Serving Cypress, TX & Trade Show Exhibitors Nationwide

JYS Sign & Print Co. designs and produces complete custom trade show booth kits in-house at our Texas print facility, making us the local choice for businesses in Cypress, TX and the Houston metro area who want a networking-forward, architecturally commanding 10x20 exhibit with a stretch table cover and 3D column presence. We ship nationwide to exhibitors at trade shows and conventions across the entire United States. Want to compare Booth Q with our other 10x20 configurations or explore a 20x20 island option? Contact JYS Sign & Print Co. today.